Decal Application

How to apply Decals

Sticker sheets

  1. Make sure application surface is smooth and clean
  2. Remove any polish using a suitable degreaser
  3. Remove sticker from sheet and apply to aera starting from one end and gently pressing the sticker down till you reach the other end
  4. You can use a credit card for this or use your fingers to make sure all the air is removed
  5. Make sure everything is stuck down
  6. That’s it

Large decal and lettering with transfer tape

  1. Make sure application surface is smooth and clean
  2. Remove any polish using a suitable degreaser
  3. Align decal where you want it and use masking tape to hold in position
  4. Depending on size and shape of decal, tape it along one edge
  5. Lift up the decal hinging from the tape
  6. Remove the backing paper from decal leaving the decal stuck to the transfer tape
  7. At this point you may wish to spray the sticky side of the decal and the application surface with application fluid to help application.
  8. Using a credit card or application tool slowly press the decal down along the length of the masking tape, working your way across the decal until you reach the other side taking care not to crease the decal
  9. From the centre work outwards to firmly adhere the decal and remove any air trapped
  10. Now at an acute angle slowly remove the transfer tape taking care not to lift the decal
  11. Run the application tool / credit card over the decal to make sure its firmly stuck down

Download a copy here in pdf format